Semi-Auto Horizontal Metal Band Sawing Machine Tool V6-G4032B

I. Key Parameters of Machine Tools

II. Basic Features of the Machine Tool

A. Machine structure: Semi-auto, horizontal, metal band sawing machine

B. Operation method: Manual / Auto; buttons are used to ensure convenient and simple operations.

C. The upper, lower, left and right hydraulic tightening actions can be realized, and sawing the bundles is also available. (The upper clamping device is not in the standard configuration, and it shall be purchased separately according to the users’ needs).

D. Prolong the service life of the saw blade:

1. The use of saw bland guide device composed of the rolling bearing, the cemented carbide, and the spring positioning system can minimize the unstable factors such as tooth punching and belt breakage.

2. Pressure bearing, spring positioning flexible saw band tensioning device.

3. The inclination angle of the saw wheel is small, and the angle of the vertical downward guide twisting of the saw blade is small. 

4. The steel brush transmission device adopts the drive transmission linked with the main drive, which can effectively remove the sawdust on the sawtooth, thus avoiding the tooth bumping phenomenon caused by sticky chips; the positions of the steel brush and the saw blade can be adjusted at any time with the wear of the steel brush, which prolongs the service life of the saw blade. 

E. The whole machine bed and replaceable guide rail slide plate have stable accuracy and long life. 

F. A closed large fuel tank is used to ensure continuous operations for 24 hours without generating heat. 

G. Recovery to high accuracy by adjustment after long-time operation. 

III. Service Commitment  

a) Our company will understand the user’s production and processing needs before sales to provide users with band sawing machines with reasonable performance and price, and will go to the user’s site to provide timely and accurate technical assistance to the user when necessary and make reasonable explanations on technical documents, drawings, use instructions, equipment performance, and analysis methods.  

b) After the product is delivered, perform the training about equipment operation, maintenance and analysis and inspection for operators and maintenance personnel;   

c) If found fault during the operation of the product, a timely reply is made or the service personnel will be dispatched within 24h after receiving the maintenance notice issued from the user;  

d) It is ensured that spare parts for maintenance are provided for delivered products.